Gtjkyu

Numismatics
Currency
Coins Banknotes Forgery List ISO
Circulating currencies
Africa The Americas Europe Asia Oceania
Local currencies
Company scrip LETS Time dollars
Fictional currencies Proposed currencies
History
Historical currencies
Greek Roman China India Persian Tibetan Thai Filipino Malay
Byzantine
Medieval currencies
Production
Mint Designers Coining Milling Hammering Cast
Exonumia
Credit cards Medals Tokens Cheques
Notaphily
Banknotes
Scripophily
Stocks Bonds
Terminology Numismatics portal
v t e

A Swiss ten-cent coin from 1879, similar to the oldest coins still in official use today

Alexander the Great Tetradrachm from the Temnos Mint, dated circa 188-170 BC

A coin is a small, flat, (usually) round piece of metal or plastic used primarily as a medium of exchange or legal tender. They are standardized in weight, and produced in large quantities at a mint in order to facilitate trade. They are most often issued by a government.

Coins are usually metal or alloy, or sometimes made of synthetic materials. They are usually disc shaped. Coins made of valuable metal are stored in large quantities as bullion coins. Other coins are used as money in everyday transactions, circulating alongside banknotes. Usually the highest value coin in circulation (i.e. excluding bullion coins) is worth less than the lowest-value note. In the last hundred years, the face value of circulation coins has occasionally been lower than the value of the metal they contain, for example due to inflation. If the difference becomes significant, the issuing authority may decide to withdraw these coins from circulation, possibly issuing new equivalents with a different composition, or the public may decide to melt the coins down or hoard them (see Gresham's law).

Exceptions to the rule of face value being higher than content value also occur for some bullion coins made of copper, silver, or gold (and, rarely, other metals, such as platinum or palladium), intended for collectors or investors in precious metals. Examples of modern gold collector/investor coins include the British sovereign minted by the United Kingdom, the American Gold Eagle minted by the United States, the Canadian Gold Maple Leaf minted by Canada, and the Krugerrand, minted by South Africa. While the Eagle, Maple Leaf, and Sovereign coins have nominal (purely symbolic) face values, the Krugerrand does not.

Historically, a great quantity of coinage metals (including alloys) and other materials (e.g. porcelain) have been used to produce coins for circulation, collection, and metal investment: bullion coins often serve as more convenient stores of assured metal quantity and purity than other bullion.^[1]

History

Spade money from the Zhou Dynasty, circa 650-400 BC.

A Kuru punch-marked coin, circa 350-315 BC, one of the earliest example of coinage in India.

An original Celtic Biatec coin and its replica on a former Slovak 5-koruna coin (1993-2008)

The first coins were developed in Iron Age Anatolia around the 7th and 6th centuries BC. Coins spread rapidly in the 6th and 5th centuries BC, throughout Greece and Persia, and further to the Balkans.^[2]

Standardized Roman currency was used throughout the Roman Empire. Important Roman gold and silver coins were continued into the Middle Ages (see Gold dinar, Solidus, Aureus, Denarius). Ancient and early medieval coins in theory had the value of their metal content, although there have been many instances throughout history of governments inflating their currencies by debasing the metal content of their coinage, so that the inferior coins were worth less in metal than their face value. Fiat money first arose in medieval China, with the jiaozi paper money. Early paper money was introduced in Europe in the later Middle Ages, but some coins continued to have the value of the gold or silver they contained throughout the Early Modern period. The penny was minted as a silver coin until the 17th century.

The first circulating United States coins were cents (pennies), produced in 1793, and made entirely from copper.^[3] Silver content was reduced in many coins in the 19th century (use of billon), and the first coins made entirely of base metal (e.g. nickel, cupronickel, aluminium bronze), representing values higher than the value of their metal, were minted in the mid 19th century.

An oxhide ingot from Crete. Late Bronze Age metal ingots were given standard shapes, such as the shape of an "ox-hide", suggesting that they represented standardized values.

Coins were an evolution of "currency" systems of the Late Bronze Age, where standard-sized ingots, and tokens such as knife money, were used to store and transfer value. In the late Chinese Bronze Age, standardized cast tokens were made, such as those discovered in a tomb near Anyang.^[4][5] These were replicas in bronze of earlier Chinese currency, cowrie shells, so they were named Bronze Shell.^[6]

Iron Age

1/3rd stater from Lydia, 6th century BC

Electrum coin from Ephesus, 620-600 BC. Obverse: Forepart of stag. Reverse: Square incuse punch

Anatolian gold coin from 4th century BC Mysia

Greek drachma of Aegina. Obverse: Land Chelone / Reverse: ΑΙΓ(INA) and dolphin. The oldest Aegina Chelone coins depicted sea turtles and were minted c. 700 BC.^[7]

According to Aristotle (fr. 611,37, ed. V. Rose) and Pollux (Onamastikon IX.83), the first issuer of coins was Hermodike of Kyme.^[8]

The earliest coins are mostly associated with Iron Age Anatolia, especially with the kingdom of Lydia.^[9]
Early electrum coins were not standardized in weight, and in their earliest stage may have been ritual objects, such as badges or medals, issued by priests.^[10]
Many early Lydian and Greek coins were minted under the authority of private individuals and are thus more akin to tokens or badges than to modern coins,^[11] though due to their numbers it is evident that some were official state issues, with King Alyattes of Lydia, 619–560 BC, being a frequently mentioned originator of coinage.^[12]

The first Lydian coins were made of electrum, a naturally occurring alloy of silver and gold that was further alloyed with added silver and copper.^[13]

Most of the early Lydian coins include no writing ("legend" or "inscription"), only an image of a symbolic animal. Therefore, the dating of these coins relies primarily on archaeological evidence, with the most commonly cited evidence coming from excavations at the Temple of Artemis at Ephesus, also called the Ephesian Artemision (which would later evolve into one of the Seven Wonders of the Ancient World). Because the oldest lion head "coins" were discovered in that temple, and they do not appear to have been used in commerce, these objects may not have been coins but badges or medals issued by the priests of that temple. Anatolian Artemis was the Πὀτνια Θηρῶν (Potnia Thêrôn, "Mistress of Animals"), whose symbol was the stag.

Ionia, Uncertain city 600-550 BCE, Hemiobol. Horse head, rough incuse

It took some time before ancient coins were used for commerce and trade. Even the smallest-denomination electrum coins, perhaps worth about a day's subsistence, would have been too valuable for buying a loaf of bread.^[14] The first coins to be used for retailing on a large-scale basis were likely small silver fractions, Hemiobol, Ancient Greek coinage minted by the Ionian Greeks in the late sixth century BC.^[15]

A small percentage of early Lydian/Greek coins have a legend.^[16] A famous early electrum coin, the most ancient inscribed coin at present known, is from nearby Caria. This coin has a Greek legend reading phaenos emi sema^[17] interpreted variously as "I am the badge of Phanes", or "I am the sign of light",^[18] or "I am the tomb of light", or "I am the tomb of Phanes".
The coins of Phanes are known to be amongst the earliest of Greek coins, a hemihekte of the issue was found in the foundation deposit of the temple of Artemis at Ephesos (the oldest deposit of electrum coins discovered). One assumption is that Phanes was a wealthy merchant, another that this coin is associated with Apollo-Phanes and, due to the Deer, with Artemis (twin sister of the god of light Apollo-Phaneos). Although only seven Phanes type coins were discovered, it is also notable that 20% of all early electrum coins also have the lion of Artemis and the sun burst of Apollo-Phaneos.

Alternatively, Phanes may have been the Halicarnassian mercenary of Amasis mentioned by Herodotus, who escaped to the court of Cambyses, and became his guide in the invasion of Egypt in 527 or 525 BC. According to Herodotus, this Phanes was buried alive by a sandstorm, together with 50,000 Persian soldiers, while trying to conquer the temple of Amun–Zeus in Egypt.^[19] The fact that the Greek word "Phanes" also means light (or lamp), and the word "sema" also means tomb makes this coin a famous and controversial one.^[20]

Another candidate for the site of the earliest coins is Aegina, where Chelone ("turtle") coins were first minted circa 700 BC.^[21] Coins from Athens and Corinth appeared shortly thereafter, known to exist at least since the late 6th century BC.^[22]

Classical antiquity

Set of three Roman aurei depicting the rulers of the Flavian dynasty. Top to bottom: Vespasian, Titus and Domitian. AD 69-96

Coinage followed Greek colonization and influence first around the Mediterranean and soon after to North Africa (including Egypt), Syria, Persia, and the Balkans.^[23]

Coins were minted in the Achaemenid Empire, including the gold darics and silver sigloi. With the Achemenid conquest of Gandhara under Darius the Great c. 520 BC, the practice spread to the Indo-Gangetic Plain. The coins of this period were called Puranas, Karshapanas or Pana.^[24] These earliest Indian coins, however, are unlike those circulated in Persia, which were derived from the Greek/Anatolian type; they not disk-shaped but rather stamped bars of metal, suggesting that the innovation of stamped currency was added to a pre-existing form of token currency which had already been present in the Mahajanapada kingdoms of the Indian Iron Age. Mahajanapadas that minted their own coins included Gandhara, Kuntala, Kuru, Panchala, Shakya, Surasena and Surashtra.^[25]

In China, early round coins appeared in the 4th century BC.

The first Roman coins, which were crude, heavy cast bronzes, were issued c. 289 BC.^[26]

• 
  

  

  
  

  
  

  Persian Achaemenid Daric, c. 350 BC
  

  
  

  
  


• 
  

  

  
  

  
  

  Reverse of a silver Tetradrachm from Athens, c. 480-420 BC
  

  
  

  
  


• 
  

  

  
  

  
  

  Bronze coin issued by Antiochus IV Epiphanes, 2nd century BC. Coin edges are curled to prevent swindlers from stealing metal by scraping the edges.
  

  
  

  
  


• 
  

  

  
  

  
  

  Bactrian Drachm minted c. 185-170 BC
  

  
  

  
  


• 
  

  

  
  

  
  

  A bronze coin of the Chinese Han Dynasty, c. 1st century BC
  

  
  

  
  


• 
  

  

  
  

  
  

  Sestertius of Marcus Clodius Pupienus Maximus, AD 238
  

  
  

  
  


• 
  

  

  
  

  
  

  Silver Drachma of Mehrdad (Mithridates I) of Persian Empire of Parthia, 165 BC
  

  
  

  
  


• 
  

  

  
  

  
  

  Coins of Early Gandhara Janapada: Very probably the earliest Indian coin: a large
  

  
  

  
  

Philippines

The Piloncitos are tiny engraved gold coins found in the Philippines, along with the barter rings, which are gold ring-like ingots. These barter rings are bigger than doughnuts in size and are made of pure gold from the Archaic period (c. 10th to 16th century).^[27]

In the Philippines, gold, which was plentiful in many parts of the islands, invariably found its way into these objects that included the Piloncitos, small bead-like gold bits considered by the local numismatists as the earliest coin of ancient Filipinos, and gold barter rings.

Piloncitos are small—some are of the size of a corn kernel—and weigh from 0.09 to 2.65 grams of fine gold. Large Piloncitos weighing 2.65 grams approximate the weight of one mass. Piloncitos have been excavated from Mandaluyong, Bataan, the banks of the Pasig River, Batangas, Marinduque, Samar, Leyte and some areas in Mindanao. They have been found in large numbers in Indonesian archeological sites leading to questions of origin. Were Piloncitos made in the Philippines or imported? That gold was mined and worked here is evidenced by many Spanish accounts, like one in 1586 that said:

“The people of this island (Luzon) are very skillful in their handling of gold. They weigh it with the greatest skill and delicacy that have ever been seen. The first thing they teach their children is the knowledge of gold and the weights with which they weigh it, for there is no other money among them.”^[28]

Middle Ages

The first European coin to use Arabic numerals to date the year in which the coin was minted was the St. Gall silver Plappart of 1424.^[29]

• 
  

  

  
  

  
  

  Lombardic Tremissis depicting Saint Michael, AD 688-700
  

  
  

  
  


• 
  

  

  
  

  
  

  Silver coin of Boran of Persian Sassanian Empire, AD 629
  

  
  

  
  


• 
  

  

  
  

  
  

  Silver Dirham of the Umayyad Caliphate, 729; minted by using Persian Sassanian framework
  

  
  

  
  


• 
  

  

  
  

  
  

  Abbasid coin, c. 1080s
  

  
  

  
  


• 
  

  

  
  

  
  

  Almoravid coin, 1138–1139
  

  
  

  
  

• 
  

  

  
  

  
  

  Brunswick-Wolfenbüttel Thaler minted in 1629
  

  
  

  
  


• 
  

  

  
  

  
  

  Japanese local currency Genbun Inari Koban Kin, c. 1736–1741
  

  
  

  
  


• 
  

  

  
  

  
  

  1768 silver Spanish Dollar, or eight reales coin (the “piece of eight” of pirate fame), minted throughout the Spanish Empire
  

  
  

  
  


• 
  

  

  
  

  
  

  Ottoman coin, 1818
  

  
  

  
  


• 
  

  

  
  

  
  

  One Rupee coin issued by the East India Company, 1835
  

  
  

  
  

Value

Five million mark coin (Weimar Republic, 1923). Despite its high denomination, this coin's monetary value dropped to a tiny fraction of a US cent by the end of 1923, substantially less than the value of its metallic content.

An unusual copper coin of King George IV of Georgia with Georgian inscriptions, 1210

A silver coin made during the reign of the Mughal Emperor Alamgir II

Currency

Most coins presently are made of a base metal, and their value comes from their status as fiat money. This means that the value of the coin is decreed by government fiat (law), and thus is determined by the free market only in as much as national currencies are used in domestic trade and also traded internationally on foreign exchange markets. Thus, these coins are monetary tokens, just as paper currency is: they are usually not backed by metal, but rather by some form of government guarantee. Some have suggested that such coins not be considered to be "true coins" (see below). Thus, there is very little economic difference between notes and coins of equivalent face value.

Coins may be in circulation with fiat values lower than the value of their component metals, but they are never initially issued with such value, and the shortfall only arises over time due to inflation, as market values for the metal overtake the fiat declared face value of the coin. Examples are the pre-1965 US dime, quarter, half dollar, and dollar (nominally containing slightly less than a tenth, quarter, half, and full ounce of silver, respectively), US nickel, and pre-1982 US penny. As a result of the increase in the value of copper, the United States greatly reduced the amount of copper in each penny. Since mid-1982, United States pennies are made of 97.5% zinc, with the remaining 2.5% being a coating of copper. Extreme differences between fiat values and metal values of coins cause coins to be hoarded or removed from circulation by illicit smelters in order to realise the value of their metal content. This is an example of Gresham's law. The United States Mint, in an attempt to avoid this, implemented new interim rules on December 14, 2006, subject to public comment for 30 days, which criminalized the melting and export of pennies and nickels.^[30] Violators can be fined up to $10,000 and/or imprisoned for up to five years.

Collector's item

A coin's value as a collector's item or as an investment generally depends on its condition, specific historical significance, rarity, quality, beauty of the design and general popularity with collectors. If a coin is greatly lacking in all of these, it is unlikely to be worth much. The value of bullion coins is also influenced to some extent by those factors, but is largely based on the value of their gold, silver, or platinum content. Sometimes non-monetized bullion coins such as the Canadian Maple Leaf and the American Gold Eagle are minted with nominal face values less than the value of the metal in them, but as such coins are never intended for circulation, these face values have no relevance.

Medium of expression

Coins can be used as creative medium of expression – from fine art sculpture to the penny machines that can be found in most amusement parks. In the Code of Federal Regulations (CFR) in the United States there are some regulations specific to nickels and pennies that are informative on this topic. 31 CFR § 82.1 forbids unauthorized persons from exporting, melting, or treating any 5 or 1 cent coins.

This has been a particular problem with nickels and dimes (and with some comparable coins in other currencies) because of their relatively low face value and unstable commodity prices. For a while,^[when?] the copper in US pennies was worth more than one cent, so people would hoard pennies and then melt them down for their metal value. It cost more than face value to manufacture pennies or nickels, so any widespread loss of the coins in circulation could be expensive for the US Treasury. This was more of a problem when coins were still made of precious metals like silver and gold, so strict laws against alteration make more sense historically.

31 CFR § 82.2 goes on to state that: "(b) The prohibition contained in § 82.1 against the treatment of 5-cent coins and one-cent coins shall not apply to the treatment of these coins for educational, amusement, novelty, jewelry, and similar purposes as long as the volumes treated and the nature of the treatment makes it clear that such treatment is not intended as a means by which to profit solely from the value of the metal content of the coins."

Debasement and Clipping

Throughout history, monarchs and governments have often created more coinage than their supply of precious metals would allow if the coins were pure metal. By replacing some fraction of a coin's precious metal content with a base metal (often copper or nickel), the intrinsic value of each individual coin was reduced (thereby "debasing" the money), allowing the coining authority to produce more coins than would otherwise be possible. Debasement occasionally occurs in order to make the coin physically harder and therefore less likely to be worn down as quickly, but the more usual reason is to profit from the difference between face value and metal value. Debasement of money almost always leads to price inflation. Sometimes price controls are at the same time also instituted by the governing authority, but historically these have generally proved unworkable.

The United States is unusual in that it has only slightly modified its coinage system (except for the images and symbols on the coins, which have changed a number of times) to accommodate two centuries of inflation. The one-cent coin has changed little since 1856 (though its composition was changed in 1982 to remove virtually all copper from the coin) and still remains in circulation, despite a greatly reduced purchasing power. On the other end of the spectrum, the largest coin in common circulation is valued at 25 cents, a very low value for the largest denomination coin compared to many other countries. Increases in the prices of copper, nickel, and zinc meant that both the US one- and five-cent coins became worth more for their raw metal content than their face (fiat) value. In particular, copper one-cent pieces (those dated prior to 1982 and some 1982-dated coins) contained about two cents' worth of copper.

Some denominations of circulating coins that were formerly minted in the United States are no longer made. These include coins with a face value of a half cent, two cents, three cents, and twenty cents. (The half dollar and dollar coins are still produced, but mostly for vending machines and collectors.) In the past, the US also coined the following denominations for circulation in gold: One dollar, $2.50, three dollars, five dollars, ten dollars, and twenty dollars. In addition, cents were originally slightly larger than the modern quarter and weighed nearly half an ounce, while five-cent coins (known then as "half dimes") were smaller than a dime and made of a silver alloy. Dollar coins were also much larger, and weighed approximately an ounce. One-dollar gold coins are no longer produced and rarely used. The US also issues bullion and commemorative coins with the following denominations: 50¢, $1, $5, $10, $25, $50, and $100.

Circulating coins commonly suffered from "shaving" or "clipping": the public would cut off small amounts of precious metal from their edges to sell it and then pass on the mutilated coins at full value.^[31] Unmilled British sterling silver coins were sometimes reduced to almost half their minted weight. This form of debasement in Tudor England was commented on by Sir Thomas Gresham, whose name was later attached to Gresham's law. The monarch would have to periodically recall circulating coins, paying only the bullion value of the silver, and reminting them. This, also known as recoinage, is a long and difficult process that was done only occasionally.^[32] Many coins have milled or reeded edges, originally designed to make it easier to detect clipping.

Other uses

Some convicted criminals from the British Isles who were sentenced to transportation to Australia in the 18th and 19th centuries used coins to leave messages of remembrance to loved ones left behind in Britain. The coins were defaced, smoothed and inscribed, either by stippling or engraving, with sometimes touching words of loss. These coins were called "convict love tokens" or "leaden hearts".^[33] A number of these tokens are in the collection of the National Museum of Australia.

Features of modern coins

Coins can be stacked.

1884 United States trade dollar

French 1992 twenty Franc Tri-Metallic coin

Bimetallic Egyptian one pound coin featuring King Tutankhamen

The side of a coin carrying an image of a monarch, other authority (see List of people on coins), or a national emblem is called the obverse (colloquially, heads); the other side, carrying various types of information, is called the reverse (colloquially, tails). The year of minting is usually shown on the obverse, although some Chinese coins, most Canadian coins, the pre-2008 British 20p coin, the post-1999 American quarter, and all Japanese coins are exceptions.

The relation of the images on the obverse and reverse of a coin is the coin's orientation. Suppose the image on the obverse of the coin is right side up; if you turn the coin left or right on its horizontal axis, and the reverse of the coin is also right side up, then the coin is said to have medallic orientation—typical of the Euro and pound sterling; if, however, turning the coin left or right shows that the reverse image is upside down, then the coin is said to have coin orientation, characteristic of the United States dollar coin.

Bimetallic coins are sometimes used for higher values and for commemorative purposes. In the 1990s, France used a tri-metallic coin. Common circulating bimetallic examples include the €1, €2, British £1, £2 and Canadian $2 and several peso coins in Mexico.

The exergue is the space on a coin beneath the main design, often used to show the coin's date, although it is sometimes left blank or containing a mint mark, privy mark, or some other decorative or informative design feature. Many coins do not have an exergue at all, especially those with few or no legends, such as the Victorian bun penny.

3 Russian rubles coin minted in 2008

Not all coins are round; they come in a variety of shapes. The Australian 50-cent coin, for example, has twelve flat sides. Some coins have wavy edges, e.g. the $2 and 20-cent coins of Hong Kong and the 10-cent coins of Bahamas. Some are square-shaped, such as the 15-cent coin of the Bahamas and the 50-cent coin from Aruba. During the 1970s, Swazi coins were minted in several shapes, including squares, polygons, and wavy edged circles with 8 and 12 waves.

• 
  

  

  
  

  
  

  Scalloped coin of Israel
  

  
  

  
  


• 
  

  

  
  

  
  

  1996 one cent coin from Belize
  

  
  

  
  


• 
  

  

  
  

  
  

  2005 Bahamas 15 cent coin is square with rounded corners
  

  
  

  
  


• 
  

  

  
  

  
  

  Decagonal two Piso Philippine coin 1990
  

  
  

  
  

Some other coins, like the British 20 and 50 pence coins and the Canadian Loonie, have an odd number of sides, with the edges rounded off. This way the coin has a constant diameter, recognisable by vending machines whichever direction it is inserted.

A triangular coin with a face value of £5 (produced to commemorate the 2007/2008 Tutankhamun exhibition at The O2 Arena) was commissioned by the Isle of Man: it became legal tender on 6 December 2007.^[34] Other triangular coins issued earlier include: Cabinda coin, Bermuda coin, 2 Dollar Cook Islands 1992 triangular coin, Uganda Millennium Coin and Polish Sterling-Silver 10-Zloty Coin.

Some mediaeval coins, called bracteates, were so thin they were struck on only one side.

Many coins over the years have been manufactured with integrated holes such as Chinese "cash" coins, Japanese coins, Colonial French coins, etc. This may have been done to permit their being strung on cords, to facilitate storage and being carried.

• 
  

  

  
  

  
  

  1917 French coin with integrated hole
  

  
  

  
  


• 
  

  

  
  

  
  

  Chinese cash coin, 1102–1106
  

  
  

  
  


• 
  

  

  
  

  
  

  1941 Palestine coin
  

  
  

  
  


• 
  

  

  
  

  
  

  Modern-day Japanese 5-yen coin
  

  
  

  
  


• 
  

  

  
  

  
  

  1924 East African coin
  

  
  

  
  

Holographic coin from Liberia

The Royal Canadian Mint is now able to produce holographic-effect gold and silver coinage. However, this procedure is not limited to only bullion or commemorative coinage. The 500 yen coin from Japan was subject to a massive amount of counterfeiting. The Japanese government in response produced a circulatory coin with a holographic image.

The Royal Canadian Mint has also released several coins that are coloured, the first of which was in commemoration of Remembrance Day. The subject was a coloured poppy on the reverse of a 25-cent piece minted through a patented process.^[35]

An example of non-metallic composite coins (sometimes incorrectly called plastic coins) was introduced into circulation in Transnistria on 22 August 2014. Most of these coins are also non-circular, with different shapes corresponding to different coin values.^[36]

For a list of many pure metallic elements and their alloys which have been used in actual circulation coins and for trial experiments, see coinage metals.^[37]

Physics and chemistry

Flipping

To flip a coin to see whether it lands heads or tails is to use it as a two-sided dice in what is known in mathematics as a Bernoulli trial: if the probability of heads (in the parlance of Bernoulli trials, a "success") is exactly 0.5, the coin is fair.

Spinning

Coins can also be spun on a flat surface such as a table. This results in the following phenomenon: as the coin falls over and rolls on its edge, it spins faster and faster (formally, the precession rate of the symmetry axis of the coin, i.e., the axis passing from one face of the coin to the other) before coming to an abrupt stop. This is mathematically modeled as a finite-time singularity – the precession rate is accelerating to infinity, before it suddenly stops, and has been studied using high speed photography and devices such as Euler's Disk. The slowing down is predominantly caused by rolling friction (air resistance is minor), and the singularity (divergence of the precession rate) can be modeled as a power law with exponent approximately −1/3.^[38]

Odor

Iron and copper coins have a characteristic metallic smell that is produced upon contact with oils in the skin. Perspiration is chemically reduced upon contact with these metals, which causes the skin oils to decompose, forming with iron the volatile molecule 1-octen-3-one.^[39]

See also

Notes and references

Bibliography

• Angus, Ian. Coins & Money Tokens. London: Ward Lock, 1973. ISBN 0-7063-1811-0.

External links

• 
  Media related to Coins at Wikimedia Commons